Blog Search

Monday, 21 October 2019

Maintenance time, a new jacket and other stuff

Ready for another adventure 

I've had the KTM for around 7 months and have covered about 7000 km.  A lower monthly tally than usual but an overseas trip, crap winter weather and other distractions have all conspired against a bigger distance.  However, with spring having arrived, some decent distances beckon.

KTM's have a reputation for "edgy" performance and a few reliability issues.  I was well aware of this when making the choice but the emotional and fun appeal, not to mention blistering performance; over-rode these considerations.

I'm happy to report that although a few issues have been reported on the KTM 790 forum, I haven't experienced any significant problems and I love it to bits.  The ultimate accolade is that it gets patted when I walk past it in the shed.  That didn't happen with the GSX-S 1000. The Gixxer was a very competent bike but it just didn't light my fire.

As reported a few posts ago, the OEM pure sport tyres were fine before winter set in but were lethal in colder, wetter conditions. Just couldn't get them hot enough to work properly. They were ditched with 3500 km on the clock.  The Bridgestone T31 sport/touring replacements have been excellent in all conditions and should have a useful life.

Another minor issue was not the fault of KTM.  I purchased a French-made Acerbis flyscreen, principally for looks.  It works surprisingly well aerodynamically but has one serious downside.  The way it's mounted allows light from the headlight assembly to be reflected up the inside of the screen.  It's not really noticeable in daylight but riding at night, the reflected light is a serious and dangerous distraction.  Presumably, the French designers never ride in the dark!  I solved this by spraying the inner face of the screen matte black and also added some tape to the top of the headlight assembly which is covered by the bottom of the screen.

Matte is the new black

Another non-serious but irritating issue has arisen in the last few weeks which may partially be due to the way I ride and partially due to the materials which KTM uses.  I began to notice that when slowing towards a stop from slow speeds, e.g approaching a stop sign in town, the front brakes were slightly "juddery" when constant light pressure was applied.  It was as if they were braking and then releasing fractionally for every part rotation of the wheel.  The first thing I checked was for rotor runout or warping and there was none.  Closer inspection showed that the disc surfaces had a partially glazed uneven appearance, something I hadn't experienced on previous bikes.  This can just about be seen on the next photo - darker uneven strips.

Disc glazing - darker strips in places

I tend to be very light on the brakes during normal road riding, using a combination of throttle and gear selection to moderate my speed in combination with reading the vanishing point in corners.  I wondered whether the light use of brakes had a polishing effect but as mentioned earlier, it wasn't something I'd previously experienced.

I mentioned it on the international Duke 790 forum and bless his heart, another Kiwi from Taranaki mentioned that he had experienced similar problems on the Ducati Multistrada which he once owned.  His take on the issue was that it could be cheaper materials (or perhaps mismatched disk and brake pad materials) and the componentry needed some sustained heat in them right from the start to avoid the problem.  He solved the matter by breaking the glaze with 400 wet and dry paper on both the disc faces and the pads, then getting some sustained heat into the assembly.

I did exactly the same, wet-sanding the disc faces with 400 paper on a block and dry sanding the pad faces in a figure of 8 pattern on a flat surface.  All surfaces were then thoroughly cleaned with brake cleaner.  Total time to complete the job was a shade over 2 hours.

De-glazed discs before riding 

I then went out to a largely deserted straight bit of road near home and did a series of high speed stops to get the brakes really hot.  I then rode home and tried some low speed gentle stops - yippee, no more symptoms!  The following photo shows a nice, even discolouration across the disc face - quite different from the previous markings. 

Nice even discolouration

There's always something new to learn and the internet is especially good for great ideas and great people when there's a problem.  If it ever happens again, I know how to tackle it!  In a wee while, I'll be replacing the OEM pads with my favourite EBC HH type.  It will be interesting to see how these work.  I've had them on my last 3 bikes and they've been far superior to the OEM ones in terms of stopping power and feel.

I've also just celebrated my 72nd birthday - pretty pleased to still be indulging in the lifelong passion of riding a motorcycle.  All the upskilling over the past 8 or 9 years appears to have paid off - still feel safe riding at a reasonable clip.

Hot chick taking me out for a birthday dinner!

Two summers ago on a particularly hot day whilst dressed in full leathers,  I suffered a bout of heat exhaustion.  It was an extremely unpleasant and debilitating experience.  By the time I got home, I had a blinding headache and was feeling extremely nauseous.

I have no wish for a repeat and when Jennie asked me what I wanted for my birthday, a mesh jacket to allow better cooling sprang to mind.  Many brands offers jackets without a liner.  Fine for guaranteed hot days but less so for changeable conditions or early morning starts and late evening finishes. Some with liners are just windproof and others waterproof.  The other thing to consider is the grade of armour that jackets come equipped with.

After much poring over specifications I decided on the black Rev’it Tornado 2. Tough construction (1000 and 750D shell), CE level 2 armour (shoulders and elbows) and a detachable thermal liner and membrane.  Back armour is not supplied as standard on the jacket to allow for choice and I went for a CE level 2 Seesoft protector. The jacket will also take a Rev’it cooler vest.

Revit Tornado 2 mesh jacket

The Hydratex thermal liner and membrane is fine for those cooler spring mornings.  I haven’t tried it in the rain but assume it’s “showerproof” as opposed to continuous heavy rain.  Not critical as I have a lightweight Spidi nylon jacket to slip over the top in adverse conditions. 

A further selling point for me is that the detachable liner is styled to wear as a casual “bomber” jacket.  Perfect for end of day wear when on tour and travelling light.

Tornado 2 liner 

The Tornado 2 will set you back around NZ$500 depending on supplier, plus another NZ$70-odd for Seesoft level 2 back armour.  Maybe some matching pants for Christmas……..

Yesterday saw some of the members from our region of the Institute of Advanced Motorists get together for a social ride.  Our region covers close to 40,000 sq km so we tend to hold our social runs in different parts of the region to give everyone the opportunity to socialise.  Yesterday, I was responsible for leading the ride on the southern part of the Coromandel Peninsula (my own backyard, near enough), so only covered about 400 km door to door.  Actually, I hate group rides with people I don't know as there are invariably some clowns who disrupt the ride and put everyone on edge. However, when everyone is trained to the same standard, it's a rather different proposition.

The weather was perfect at around 20 degrees C and traffic was light, being the weekend before a public holiday long weekend when it will turn to custard.  Rides like this are genuinely good for one's mental state, or soul if you prefer.


Assembling in the town of Paeroa

Stopping in Whitianga to pick up lunch - a nice mix of bikes

Not a bad spot to eat lunch - Whitianga Harbour

Finally, nothing to do with motorcycling. A couple of decades ago, I used to sail at national championship level and have retained an interest in sailing.  Interestingly enough, motorcycling, sailing and flying all require much the same skill set.  Anyway, New Zealand are the current holders of the Americas Cup, the world's oldest sporting trophy.  They last won it in foiling catamarans which were an outrageous design and could sail at over 40 knots.  For the next Cup in 2021, NZ have specified a 75 ft monohull, but one which foils and will supposedly reach 50 knots - even more outrageous!

The USA, Britain, Italy and NZ have all recently launched their prototypes and have begun testing them.  The NZ yacht Te Aihe (The Dolphin in translation from Maori) has been testing on Auckland harbour and looks absolutely spectacular, if not somewhat bizarre.  My favourite photo below.

Te Aihe in full flight


18 comments:

  1. Really interesting design. 50 knots!

    An entertaining post...

    ReplyDelete
    Replies
    1. Thanks Richard,
      A good video about Te Aihe here: https://www.youtube.com/watch?time_continue=1&v=fiXFQMNIDOw . There are some other videos on YouTube of it foiling too.

      Delete
  2. A bit of shed time eh? Been doing a bit of that too - and I just had to replace my jacket and pants. Still need boots and a helmet - and a lotto win...

    FYI, a chap I know down here just hit 100,000km on his Superduke. He's had a few issues but apparently his donk is the only one the local dealer hasn't had to operate on.

    ReplyDelete
    Replies
    1. Hi Andrew,
      How is it that our expenditure always seems to come in big lumps?
      Two of my IAM mates have 1290 GT'S. They've had the odd niggles but love them to bits. Mine still makes me laugh and that counts for an awful lot!

      Delete
  3. Jeez Geoff, is that a boat or a low flying plane. Its not even in the water!!!!
    Nice find on the brakes by the way.

    ReplyDelete
  4. Hi Steve,
    Yeah, it's a beast, isn't it? Can't wait to see it in the flesh.
    Yep, can't believe how much better the brakes are for a good clean-up. You don't really notice day by day. Hope you and the family are well mate and ready for a hot Sydney summer!

    ReplyDelete
  5. Happy birthday Geoff! Great score with the present (and the “hot chick”). People can argue about the protection a mesh jacket gives compared to leather but if it keeps you fresher in summer, that is surely adding a larger safety margin away from “testing” it’s crashworthiness.
    Interesting re your brakes. Good thing the fix was easy. I am finding that I am getting a light squeal from my front brakes as I come to a stop since I fitted the HH pads. Only a minor annoyance though since the the bite and feel are light years better than with the old pads.
    That isn’t a yacht. It’s a space ship!! Crikey, it must be worth a pretty penny!

    ReplyDelete
    Replies
    1. Thanks Dave..... the hot chick is a keeper 😁. The jacket uses heavier materials than my winter Gore-Tex and has higher spec armour but I'll still use my full leathers unless it gets really hot.

      I haven't experienced brake squeal with HH pads but I've read that plenty of people do. It wouldn't worry me either too much with the performance they give.

      Te Aihe is something else, isn't it? I think Americas Cup campaigns start at $100 million and the sky is the limit.

      Delete
  6. Interesting comments about the brake discs there Geoff. I've had two bikes' front discs warp on me in recent years - And all without going anywhere near a track. Plus like you I'm pretty light on front brake usage in general too. I wonder if this is a symptom of manufacturers cutting costs and perhaps taking things a little too far?

    ReplyDelete
    Replies
    1. Hi Lee,
      I've never had any warping on any bike but I've certainly read about enough cases - quite worrying. You may well be right about taking things a little far. I'll leave the OEM pads in situ for a while to see if it happens again but also keen to see how HH pads perform on it.

      Delete
  7. To be honest I've never really paid that much attention to my brake disks, but now I've got to go and see what they look like. And that boat looks truly bizarre; wonder how difficult it is to sail compared to a more traditional boat.

    ReplyDelete
    Replies
    1. Me neither David, never really felt the need before but it's been an interesting exercise. Yes, the Americas Cup is going to be quite a sight. Just hope a crew member doesn't fall overboard and get sliced by the foils!

      Delete
  8. Geoff - Further to your last posts on the KTM what sort of fuel economy are you getting with it? Especially now that it's fully run-in as such?

    ReplyDelete
    Replies
    1. Hi Lee,
      Depends what sort of ride I'm on but just looked at my "B" odometer vs. fuel and over the last 1830 km, it's been 3.9 l/100 km. On my "A" odometer, the last trip was 4.2 l/100 km. If I'm "making brisk progress" but not being stupid, it will go up to 4.5l/100 km. That's about one whole litre per 100 km better than the GSX-S 1000 in near-identical conditions. When you and I did the trackday at Taupo, the Gixxer was a shade under 10 l/100 km.

      Delete
  9. Geoff

    That sounds to be pretty good, especially the 4.5 figure considering you're being a bit more enthusiastic with the throttle. Interestingly I managed some 19Km/litre out of the Ducati Multistrada 950 I rode a week or so back. That was going by the trip reading versus how much fuel it took to fill it again so was a pretty accurate measure.

    ReplyDelete
    Replies
    1. Lee,
      In true terms, consumption will be about 6% worse for my bike due to odometer error. My Blackbird used to average about 18 km/lt. That's probably because it was almost impossible to thrash on public roads unless you stayed in the lower gears!

      Delete
  10. Very interesting about the brakes. I get an intermittent ABS fault light on my FJR a few times on tours, usually resets itself once I brake firmly.

    Good read and beautiful place you live Geoff.

    ReplyDelete
    Replies
    1. Hi Warren,
      Thanks - intermittent warning are a pain! No problems so far on the KTM, but recently spent $550 getting to the bottom of an intermittent airbag warning light on my RAV 4. It was driving me nuts!

      Delete