Wheel alignment

Saturday 30 April 2016

The Bee's Knees, a visitor and how we choose our bikes


The Bee's Knees
Blame it on a combination of discus throwing as a school athlete and competitive sailing later on in life but my 68 year old knees aren't in the best of shape.  I had reconstructive surgery on one knee in 1980 but thanks to the benefits of cycling, I've managed to keep away from the butcher's (sorry, surgeon's) knife since then.

However, riding a sports bike with high pegs does cause aching knees after a day in the saddle. Waving my legs in the breeze to get relief during a longer haul is a regular occurrence. Not wishing to join that well-known geriatric biker gang "Sons of Arthritis, Ipuprofen Chapter" because of  an aversion to regular medication, it was time to look at other options.

Striking fear into the public 

Some years ago, I fitted a footpeg-lowering kit to my Honda Blackbird and although it was only a 25mm drop, the difference in comfort levels was huge.  A quick search of the internet revealed several options for the GSX-S. Some looked cheap and nasty and others over-engineered and pricey. The nicest-looking alternative was from a Buell, but required a bit of grinding, plus bushing of the pivot holes. I then found a member of a Hayabusa forum who sold a complete kit, using Buell pegs but professionally machined to suit the 'busa.  Trouble was, the forum post was 2008 so was he still around?  Sent an email, got a reply in less than 2 hours and yes, he was still making them and they fitted the GSX-S - yippee!!!

The postman arrived with a package from the US and it was instantly torn open.  What a treat to see some engineering of the highest quality - all properly bushed and polished.  In fact, they are better finished than the originals.  Kudos to Joe Satterwhite for setting such high personal standards.

Yumm - shiny farkles!


About 20mm longer and 25mm lower than OEM pegs

The first job was to get a builder's level out so that the height difference from standard footpegs to both the gear change and brake pedals could be measured and replicated with the new lower pegs. With that done, the old pegs were removed and the new ones fitted in under 10 minutes, including applying lubricant.  At this stage, I'm not going to transfer the "hero blobs" from the OEM pegs until I've tried them out on a reasonable distance run.

The final stage of fitting was a bit more time-consuming.  The gear pedal was easy to adjust to the new height - just undo two nuts on the change linkage, turn the threaded rod until the right measurement was attained and lock it all up again.

Setting up the gear linkage

The time-consuming bit was setting up the brake position.  To get the correct measurement, I had to cut a few mm off the thread of the brake cylinder clevis pin and it was easier to slacken off the whole footrest assembly to do this. The old pegs can still be re-fitted even with some thread removed so no worries on that score. The fiddly bit was adjusting the rear brake light activation switch to compensate for the new position of the brake lever - fingers like ET would have been really useful to stop getting cramp in them!!

The whole job took less than an hour and a half to complete, looks great and feels really comfortable - now to try it on a decent run!

The finished article

A Visitor to our Shores
The world is indeed a small place.  Jennie and I were on Vancouver Island in 2014 as part of a trip through Canada and Alaska.  Because of time constraints, we were unable to meet up with fellow moto-blogger Darlene aka Princess Scooterpie who volunteers as a motorcycle instructor on the island.  However, I recently received a message from Dar saying that a fellow instructor from the island; expat Kiwi, Debra Roberts would be visiting family in our neck of the woods so lunch at our place was hastily arranged.  Being bikers and both involved in training, we instantly clicked and it was non-stop chat.  Serendipity at its best, just a shame that we weren't able to get out together for a ride.

Debra and an old guy....

How we choose our bikes
And now for something completely different which might strike a chord.......

Y'know...... choosing and buying a new bike is normally a long(ish) process and involves much poring over brochures and specs, reading reviews and so on, culminating in a series of test rides. Most of the previous sentence involves dispassionate analysis and logic which is actually pretty straightforward.  Buying with the head is one thing but to be truly satisfied, a purchase involves both head and heart, doesn't it?   A darned sight harder to define what it is about bikes which touch the heart as it's such a personal thing.

When I bought the Street Triple, a Ducati Monster, Speed Triple and Thruxton Bonneville were tried too but it was only the Street Triple that made me say "I want it and I want it NOW".  Let it be said, it wasn't very long into the test ride either!  Six happy years ensued and it would get a pat and smile when I walked past it in the shed.  It was only replaced because the km's were getting up a bit but also because I had Chief Executive Permission to do so.  (Guys reading this may nod knowingly).

I won't go into the details of looking for a replacement as it is is covered HERE but the selection process was unusually rapid.... almost instant in fact.  The test ride of the GSX-S1000 revealed a bike with sensational performance, lots of features such as traction control/ABS and it had great ergonomics.  What was not to like, so I bought one.

Geriatric biker goes out for a quiet ride

Six months and closing on 10,000 km from new, I've sorted the suspension, it's now got good rubber, done a trackday and lots of mentoring with the Institute of Advanced Motorists.  A worthy replacement or step up from the Street Triple? Well actually, that's highly debatable and if pressed, I might say no.  I'm certainly not disappointed with its performance but it's not light years better than the Street Triple for my everyday road use. So what's the reason then?  Riding it is enjoyable and fun, but it's not exhilarating.  Bland is not quite the right word, not feeling "as one" with the bike is not quite the right description either. To be candid, I can't give you any concise specifics that make sense, but in a nutshell, there's no emotional connection.  Looking back on the test ride, it didn't "sing" to me like the Triple did and should have listened to my heart.  It gets properly cleaned and detailed because I'm an anal retentive engineer, not because it's a labour of love.  It doesn't get patted when I walk past it in the shed and that's probably the most telling thing of all. This is all a bit of a ramble but hopefully, other riders will make sense of it and understand.

Does this mean that I'm looking to replace the Gixxer?  Well no, at least not in the immediate future but it's unlikely that ownership will continue for more than another year or two at most. It's enjoyable but I want more than that. Looking at the 1200 Bonneville press releases, there's a bit of a heart flutter probably based on nostalgia, but who knows what will whisper in my ear when the time comes?

S'pose you could sum it up by saying that if you don't use both your head and heart when getting a new bike, it might not be a match made in heaven.  The path to true love is rarely a smooth one!

10 comments:

  1. Those last 2 sentences perfectly sum up what life, the universe and biking is all about - thanks Geoff

    ReplyDelete
  2. Hi Loui! Thanks very much. I might add.... continue to have fun as you get older :-). All the best!

    ReplyDelete
  3. Know exactly how you feel. My street triple caused much grinning and excitement. It did sing beautifully. I kept both for a few weeks to make sure before selling.
    It's hard to compare a bike that you have made your own to one that's new and different and has not been adapted. All the little additions and adjustments make it yours.
    I'm still adjusting and adjusting to my Honda Vfr800. It does get a pat and a look as its a beautiful looking bike but I have to remind myself that I wanted a different type of bike when I compare to the triumph. One reason I didn't buy the suzuki was it was too similar to the triumph in its intended purpose.
    By the way an arrows slip on means it now really sings, but appropriately it's a deeper different less urgent song. Cheers

    ReplyDelete
    Replies
    1. Hi Peter,
      Congrats on the VFR - great bikes. Yes, choosing the right bike is a real balancing act. I wouldn't say no to the new 1200 Bonnie in a while. I think you're right about similarities between the Triple and the Suzuki. Will drop you an email in a couple of days - just got back from a training ride (and a puncture!)and out tomorrow on a social run!

      Delete
  4. Always good to see motorcyclist's meet. And what a coincidence, that Deb was headed in your direction.

    Funny you should say that there is a lack of - let's call it: feelings - for your current bike. It's somehow similar to my "relationship" with the Beemer I owned before. It was a great bike and all, but... no connection.
    And yes, Geoff, it makes total sense. I'd say, go out and follow your heart (but I am a romantic, and love happy endings...).

    ReplyDelete
  5. Hi Sonja - it really is a small world eh? We were hoping to get a ride in together this week but I've got a few commitments and the weather isn't looking all that flash either.

    Delighted you understand! Peter Clifford (above)sent me an email and in it, he talked about some bikes not having enough differentiation from each other. He might have hit on one of the contributing factors. In real world terms, the Street Triple and the Suzuki aren't so very different and that might be part of the problem.

    Lovely to hear from you!

    ReplyDelete
  6. Very well said that about the heart and mind synthesis in selecting a bike. My new CB1000R sang to me with its single sided swingarm and the fact that it is Italian designed and made. I bought it without a test ride. Now it's 2,000 miles later and with a few mods and some great time spent together I find I can't walk by without giving her a stroke.

    ReplyDelete
  7. Hi Anon and thanks for taking the time to drop by! The CB1000R is a gorgeous bike and isn't it great that there's such a great range of machinery on the market. We're bound to find something that touches the heart!

    Safe and enjoyable riding.......

    ReplyDelete
  8. Hi, any chance of the contact details for the lowered pegs? Kindest Regards Richard

    ReplyDelete
    Replies
    1. Hi Richard,
      Sorry but it's nearly 2 years since I got rid of the Suzuki and didn't keep the contact email. However, the person you need to search for on the Hayabusa forum is Joe Satterwhite. Best wishes!

      Delete

Hello! I love to hear your feedback as it often leads to other things. However, if your comments are blatant advertising, then they won't get published.